SEAWORKS (Oceania)
Subsidiary of ABC DIVING® Ltd
linkedin - Facebook
Headquarters in Vanuatu, Main Street, Nambatu, P.O. Box 3242 Port Vila
(representation in New Caledonia, BP 17007 - 98862 Noumea)
We operate throughout Oceania Islands, with the capacity to stay working at remote locations.
We offer a full range of services to international or domestic fleets and Maritime Civil Engineering:
Complete Diving Services to Ocean Going Ships and Domestic Fleet:
- Inspection, Repair and Maintenance afloat (IRM), IWS, UWILD, with Divers Approved IMCA and HSE (Full HD video CCTV streaming for "On Live" remote inspection)
- Underwater Damage Assessment - Insurance and Purchase Underwater Survey Report
- Remote Operated Vehicle (R.O.V.) Survey
- Biofouling Reports in compliance with MPI CRMS for vessels bound for New Zealand
- Off Shore Underwater Hull Cleaning (outside territorial waters) with specific brushes hydraulically driven, hand tools and water blasters
- Propeller Cleaning and Polishing with specific discs hydraulically driven
- Off Shore assistance to vessels for diving works and towage (tugs up to 59 TBP)
- Underwater cutting and welding: "Wet" welding (emergency repair) and "Dry" Welding (cofferdam) on-site for new steel plate insert whilst the vessel is afloat (such renewals are to class requirements, permanent repair and can save valuable time and money outside the dry-dock).
- Ship Salvage: Stranded or Sunken Vessels re-floating and Rapid Underwater Patching suitable for all kinds of hull materials (steel, aluminum, GRP, timber)
- Fuel-Oil recovery from Stranded or Sunken vessels.
Class In-Water Survey (IWS) - UWILD and Biofouling Report NZ CRMS MPI compliant
Our dives are Surface Supplied with radio communications, Full HD CCTV + Laser Pointer for the camera and light
Underwater Welding and cutting (Broco systems)
Inshore (domestic fleet) & Offshore (international fleet) Underwater Hull Cleaning & Props polishing (Grade A Rubert & Co Scale)
To contact us
Emergency Call: (678) 7100 230 - H24 -
Ship Salvage, Towage, Harbour Clearance
Complete Diving Services to Maritime Civil Engineering:
- Survey - Inspection Reports with Full High Definition CCTV (Diver's head camera + light + lazer pointer); R.O.V. with acoustic positioning "SeaTrack" (for transcription on marine chart or Google Earth picture); DRONE for aerial views.
- Surface and Underwater Drilling & Blasting in sensitive areas by means of Non-Detonating safety cartridge (no shock wave and almost no vibration, resulting in no impact on the environment and maritime infrastructures): Rock Breaking, Shaft Sinking, Pier/footing Excavation, Trenching for pipelines. For steel cutting (e.g. Pier piles with or without concrete inside, Shipwrecks difficult access, etc.) we use SEMTEX RAZOR Flexible Linear Shaped Charge (FLSC) to produce a linear cutting action upon detonation; when a reliable and fast cut is required, our FLSC is used to sever a multitude of materials.
- Sea bed anchoring (MantaRay and Helical Anchors) for vessel's mooring, Solar panels anchorage, etc.
Underwater Cutting (all materials),
Sea bed anchoring (for vessel, walkway, jetty), Aerial Surveys
Marine Outfall installation, R.O.V. Inspection
Sea Works photos gallery (works carried out throughout South Pacific Islands in 2020)
Videos samples:
Wet Welding
Underwater Emergency Patching
Underwater Patching Tool "SUPRAFIX" set up
